Page 14 of 30
EN109-1413760-47 IFU
MANUAL OPERATION
Select the info button in the top right corner to
display information to help you select the right
mode of training.
Levels
The resistance of the training can be set from level
1 to 12, just like when using the Quick start. These
levels are preprogrammed levels of power.
Power
Choose Power to accurately set the power in Watts.
The power will be kept at the selected level
independent of the cadence. Please note: The
slower the cadence (rpm), the higher the force for
each rotation will be.
Torque
Choose training on torque when you want to control the amount of force on the pedals. The
advantage of this training method is that when due to fatigue the cadence drops, the amount of
force required to ped will not increase. This can be very convenient when you don`t want the force
to become too high on an injured joint.
Note
: For values lower than 20 W or 6 Nm, the accuracy cannot be guaranteed as required by the
medical device guidelines.
