enphase B280-1200-LL-I-US00-RF0, Руководство по установке, Страница: 4 / 24

AC Battery Installation
© 2016 Enphase Energy Inc. 141-00036 Rev 01 4
SAFETY
To ensure the safe installation and operation of the AC Battery, note the following safety symbols that appear throughout
this document to indicate dangerous conditions and important safety instructions.
DANGER :
This indicates a hazardous situation, which if not avoided, will result in death or serious
injury.
WARNING :
This indicates a situation where failure to follow instructions may be a safety hazard or
cause equipment malfunction. Use extreme caution and follow instructions carefully.
NOTE:
This indicates information that is very important for optimal system operation. Follow
instructions closely.
In Case of Fire or Other Emergency
In all cases:

If safe to do so, switch off the AC breaker for the AC Battery circuit, and if a disconnect switch is present, switch
off the AC disconnect for the AC Battery circuit.
 Contact the fire department or other required emergency response team.

Evacuate the area.
In case of fire:

When safe, use a fire extinguisher. Suitable types are A, B, and C dry chemical fire extinguishers. Additional
extinguishing media include carbon dioxide, or alcohol-resistant foams.
In case of flooding:

Stay out of water if any part of the AC Battery or wiring is submerged.

If possible, protect the system by finding and stopping the source of the water, and pumping it away.

Let the area dry completely before use.
In case of unusual noise, smell or smoke:
 Ensure nothing is in contact with the AC Battery or in the venting area on top of the AC Battery.

Ventilate the room.

Contact Enphase Customer Support at enphase.com/en-us/support/contact.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This guide contains important instructions that you
must follow during installation and maintenance of the Enphase AC Battery. Failing to follow any of these instructions
may void the warranty (
enphase.com/warranty ). Follow all of the instructions in this manual. These instructions are key
to the installation and maintenance of the Enphase AC Battery™. These instructions are not meant to be a complete
explanation of how to design and install an energy storage system. All installations must comply with national and local
electrical codes and standards.
DANGER : Risk of
electric shock.
Risk of fire.
Do not attempt to repair the AC Battery; it contains no user-serviceable parts. No routine
maintenance is required. Tampering with or opening the AC Battery will void the warranty. Warranty
void if enclosure removed. If the AC Battery fails, contact Enphase Customer Support for assistance
at
enphase.com/en-us/support/contact .
Only qualified electricians should install, troubleshoot, or replace the AC Battery.