2. Installation
2.3
System Memory (SIMM and DIMM)
This motherboard supports four 72-pin SIMMs (Single Inline
Memory Modules) of 4MB, 8MB, 16MB, 32MB, and/or 64MB to
form a memory size between 8MB to 256MB. The DRAM can be
either 60ns or 70ns Fast Page Mode (FPM, Asymmetric or
Symmetric), Extended Data Output (EDO). SIMMs must be installed
in pairs so that each bank contains two of the same size memory
modules.
Install memory in any or all of the banks an any combination as
shown in the table below:
Item
Bank
Memory Module
1
DIMM 1
8-128MB
2
DIMM 1, 2
8-128MB
3
DIMM 2
SIMM 3, 4
8-128MB
4
DIMM 1
SIMM 1, 2
8-128MB
4-32MB
5
SIMM 1, 2
4-32MB
6
SIMM 3, 4
4-32MB
7
SIMM 1, 2, 3, 4
4-32MB
NOTE:
You cannot mix two
types
(FPM, EDO, or SDRAM) or sizes
of memory in a single bank. After installing any memory modules,
setup is required using "Auto Configuration" in the Chipset Features
section of BIOS setup.
EP-PT11 User's Manual
8
SDRAM voltage
select (3.3v/5v)
DIMM 2
DIMM 1
SIMM 4
SIMM 1
SIMM 2
SIMM 3
