26
Manual
Rev. A
Doze Mode
When disabled, the system will not enter Doze mode. The specified time op-
tion defines the idle time the system takes before it enters Doze mode.
Standby Mode
When the standby mode timer times-out, it will enter the standby mode and
retain CPU at a slow working speed. The screen will be blanked out.
Suspend Mode
This function works only when the Pentium II Processor is installed. The timer
starts to count when system Standby mode timer is timed out and no PM
Events are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down
This option lets you specify the IDE HDD idle time before the device enters
the power down state.
Throttle duty Cycle
Choose the duty cycle time : 12.5%, 25%, 37.5%, 50%, 62.5%(default), 75%,
or 87.5%. The bigger of the percentage, the more saving power it gets.
PCI/VGA Active Monitor
Enabled : the system can not enter the power saving mode when monitor is
on.
Disabled : the system can enter the power saving mode when monitor is on.
Soft-Off by PWRBTN
When enabled, turning the system off with the on/off button places the system
in a very low-power-usage state, with only enough circuitry receiving power to
detect power button activity or Resume by Ring activity.
Resume by Ring
Enabled : Wake up the system from ring signal ( COM Port )
Disabled : (default) Ring signal can not wake up the system.
Resume by Alarm:
his option allows you to have the system turn on at a preset time each day or
on a certain day.
