III-5-4 FAN Connector
1).This connectors support a CPU cooling fan of 500 mA (6WATT, +12V) or
less. Orient the fan so that the heat sink fins allow airflow to go across the
onboard heat sink(s). Depending on the fan manufacturer, the wiring and
plug may be different. The red wire should be positive (+12V), while the
black should be ground. Connect the fan’s plug to the board taking into
consideration the polarity of the connector.
WARNING!
The CPU and/or motherboard will overheat if there is no airflow
across the CPU and onboard Heatsink. Damage may occur to the
motherboard and/or the CPU fan if these pins are incorrectly used.
These are not jumpers, do not place jumper caps over these pins.
GND
Sensor
GND
Vcc
Sensor
Vcc
Содержание EP-KB11
Страница 28: ......