SHOULDERS
(Warning: Avoid placing pads close to your heart.)
1. Carefully place two massage pads horizontally across the area of
your trapezoids.
2. Place pads in a parallel position for rotator cuff ailments.
ARMS AND HANDS
(Warning: For hands and wrist we recommend using small size pads or
the e-Pulse® Massage Gloves which are sold separately.)
1. Carefully place the massage pads on either side or across the
length of your forearm, around your elbow, or across your bicep
and/or triceps.
2. Treat multiple areas simultaneously using four pads, or use 6 pads
with the optional dual connector.
3. Place pads vertically when pain extends across a significant distance
of your arms or on either side when treating a smaller area.
HEAD
(Warning: For head and jaw therapies we recommend using the
e-Pulse® Auricular Ear Clips - sold separately. You can also use small
massage pads.)
1. To treat Tempomandibular (TMJ) disorders, carefully place the small
massage pads over your TMJ joint area.
2. To treat headaches and migraines, place the massage pads where
your neck meets your head. (Avoid placing pads too far up into
your head.)
3. If you are using the e-Pulse® Auricular Ear Clips, snap the clips onto
your ear lobes and connect the ear clips to your massage device.
SELECTING YOUR THERAPY
1. Turn the unit ON.
2. PRESS the (T) button to begin selecting your therapy (continue
pressing to cycle trough each therapy).
3. PRESS the CENTER button to ACTIVATE your desired therapy (both
CHANNEL A and CHANNEL B will be activated by default).
4. PRESS - or + to modify the intensity of your therapy.
5. PRESS the CENTER button to SELECT CHANNEL A ONLY (the A and B
CHANNEL indicator inside the middle circle tells you which CHANNEL
you are selecting).
6. At this point you can either ADJUST the INTENSITY of your therapy
or ASSIGN a THERAPY to CHANNEL A ONLY.
7. PRESS – or + to modify the intensity of your therapy.
8. PRESS the (T) button to ASSIGN a therapy to CHANNEL A ONLY
(continue pressing the T button to cycle trough each therapy).
9. PRESS the CENTER button to SELECT CHANNEL B ONLY (the A and B
CHANNEL indicator inside the middle circle tells you which CHANNEL
you are selecting).
10. PRESS – or + to modify the intensity of your therapy.
11. PRESS the (T) button to ASSIGN a therapy to CHANNEL B ONLY
(continue pressing the T button to cycle trough each therapy).
12. PRESS the CENTER button to SELECT CHANNEL A and CHANNEL B.
(the CHANNEL INDICATOR inside the middle circle will show both
CHANNELS as ACTIVE).
