Enovation Controls Murphy CONNECT, Руководство по установке

Страница: 8 / 11

Section 40 8 00-02-1150
2018-10-08
Wiring Instructions
PIN Specifications for 8 Position Amphenol Connection
PIN 8 Pin
1 Battery (+)
2 CAN +
3 CAN -
4 RS485 +
5 RS485 -
6 Digital I/O
7 Ig
8 Battery -
Wiring of this device must meet all applicable electrical codes.
When the accessory harness is used, the PowerCore controller in the panel will need the I/O
established prior to use:
• TEC-10 and ML1000: Set the Digital Output 2 function to Ignition On
(On in Standby).
• ML2000: Set the Digital Output 4 function to Ignition On
(On in Standby).
NOTE: If the application is left in Auto mode, a battery maintaining system should
be installed for possible battery drain due to parasitic loads of ancillary devices
on the system.