Enovation Controls Murphy CONNECT, Руководство по установке

Страница: 2 / 11

Section 40 2 00-02-1150
2018-10-08
In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at enovationcontrols.com.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
• Read and follow all installation instructions.
• Visually inspect this product before installation for
any damage during shipping.
• Disconnect all electrical power to the machine.
Failure to do this before welding can result in
damage to the panel and/or its components.
• It is your responsibility to have a qualified technician
install the unit and make sure the installation
conforms to local codes including but not limited to
double insulation and fire containment.
• Observe all Warnings and Cautions in each section
of these instructions.
• The Murphy CONNECT product is a telemetry
product designed for use in industrial environments
for remote monitoring and control when used with
Murphy’s PowerCore ® family of controllers.
Contact Enovation Controls Technical Service if you have
any questions or concerns at: +1 918-317-4100.
IMPORTANT! Improper use and operation of electronic
products can be dangerous. It is required that point-of-
operation guarding devices be installed and maintained.
All such devices must meet OSHA and ANSI Machine
safety standards. The manufacturer shall not accept any
responsibility for installation, application or safety of
systems.