ENOTECNICA PILLAN CORKER-M, Инструкция по эксплуатации, Страница: 4 / 20

Corking Machine CORKER-M
4
1. INTRODUCTION
1.1 MANUAL
The manual is considered an integral part of the machine and as such:
 It must be preserved intact (in all its parts);
 It must accompany the machine until demolition (even in case of movements, sale, rental, etc.).
1.2 MANUFACTURER'S DATA
Manufacturer: ENOTECNICA PILLAN srl
Via Chiesa R. 4/6, Loc. Rampazzo
36043 Camisano Vic. (VI)
Tel.: +39 0444-719004
Fax: +39 0444-719044
e-mail: info@enotecnicapillan.it
Website: www.enotecnicapillan.it
1.3 TECHNICAL SUPPORT
The technical support service is available to customers for:
 Clarifications and information;
 Interventions at the customer's premises, through the sending of specialist personnel with the
charging for transportation and labour expenses;
 The sending of spare parts.
ATTENTION It should be remembered that:
 The customer must always buy spare parts that are original or authorised by the manufacturer.

The use of non-original parts and/or defective or incorrect installation exempt the manufacturer
from all liability.
1.4 LIABILITY
The manufacturer declines all liability in case our manual is not carefully complied with or in the
event of improper use of the machine. Before carrying out any operation, read the manual or
contact the manufacturer or authorised dealer.
1.5 WARRANTY
The company ENOTECNICA PILLAN SRL ensures that the machine has been built in compliance with
current regulation.
The product warranty is 12 months from delivery.
The manufacturer guarantees only the replacement or repair of damage parts at its headquarters. Any
shipping costs and labor are at the buyer’s charge.