Corking Machine
CORKER-M
18
8. DISPOSAL AND DEMOLITION
8.1 WASTE DISPOSAL
During the use of the machine as part of the work process, waste substances or scrap are
produced that must be collected, recycled and disposed of according to the laws in force in the
country where the machine is installed. The parts of the machine that are being replaced must be
treated in the same way.
8.2 MACHINE DEMOLITION
At the moment of the demolition of the machine, it is necessary to separate the plastic and
electrical components which must follow recycling norms in accordance with local regulations.
Regarding the metal mass, simply separate the steel parts from those in other materials or alloys,
to allow a correct recycling for melting.
ATTENTION: any drained fluids should not be mixed together and should be stored in closed
containers to avoid contamination with foreign substances. Their disposal must be entrusted to
special waste disposal consortiums.
9. GENERAL CONDITION OF SALE
TRANSPORTATION:
to be borne by the purchaser.
COMPLAINTS:
complaints will not be accepted after eight days from receipt of the goods and returns
will not be accepted without our authorisation and being free of charge. The goods travel at the
customer's risk.
RESERVATIONS:
the manufacturer is not liable for breakage or damage resulting from uses that are
different from those for which the goods are intended. The warranty does not cover deficiencies and
defects due to the consumption of those parts that by their very nature are subject to wear or in cases
where the parts returned have in any case been disassembled, tampered with or repaired outside of our
premises.
WARRANTIES:
the company ENOTECNICA PILLAN SRL ensures that the machine has been built in
compliance with current regulation. The product warranty is 12 months from delivery. The manufacturer
guarantees only the replacement or repair of damage parts at its headquarters any shipping costs and
labor are at the buyer’s charge.
The warranty excludes
all the parties which by their nature are subject to
wear.
The warranty is void
for errors due to incorrect electrical connection, the lack of adequate
protection, incorrect action, improper use, use of non-original parts, disassembled component, repaired
and/or altered by persons not authorized by the company manufacturer.
COMPLAINTS:
the place of jurisdiction is the Court of Vicenza.
TECHNICAL DATA:
the technical data contained in this manual is for information purposes and is not
binding. The company reserves the right to make changes without duty of notification.
