ENOTECNICA PILLAN BACCO 2, Инструкция по эксплуатации

Страница: 9 / 20

Filler BACCO
9
5.1 POSITIONING
Be sure to place the filler in a safe place to prevent that any accidental knocks or vibrations can drop it and then
cause damages to people or property.
Adjust the
P front feet so that the filler is stable.
Connect rubber hoses to the incoming fittings E for the filling and to the output fittings U for the dumping of the
liquid.
5.2 STARTING THE MACHINE
You can use various sizes of bottles.
According to the height of the bottle to be used, you have to adapt the filler by moving up or down the bottle holder
1 , by hooking it to the sequence of cracks on the front of the legs of the filler.
The final level of the liquid in the bottle can be varied by adjusting the spacer 2 , located above the rubber sealing
cone 3 , placed on each nozzle 4 .
5.3 WORKING
The working is simple and it is based on the principle of communicating vases.
The tank
V , is filled by introducing the liquid through a tube connected to the incoming fitting E , either manually or
by means of a pump. In the PE version, the pump is installed directly on the filler.
Once the tank is filled, you can proceed to fill the bottles.