enorossi DM Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 52

enorossi DM Series Скачать руководство пользователя страница 5

The machine has been designed in conformity with European machine safety standards and, in particular, the following
standards have been considered
1. EN 292/2 Ed. 1991: Safety of machine. Fundamental

specifications and principles.

2. ISO 7000 Ed. 1994: Safety decals to be used on machine

The machine must be used by operators who

1. Have a good knowledge of safety standards and
2. Are well informed on risks of this machine and dangerous areas and on the importance of not tampering with protection

guards.

3. Have been well trained on how to operate the machine
4. Will inform manufacturer of any malfunctioning

In the event this manual is lost or damaged, a new copy may be requested from this address:

IMPORTANT! If the machine is sold, please turn this manual over to the new owner.

ROTARY DM 4-5

USER’S AND MAINTENANCE MANUAL

The machine has been designed in conformity with European machine safety standards and, in particular, the following
standards have been considered:

Safety of machine. Fundamental concepts and general principles of mechanical design. Technical

Safety decals to be used on machine.

The machine must be used by operators who:

Have a good knowledge of safety standards and regulations.
Are well informed on risks of this machine and dangerous areas and on the importance of not tampering with protection

Have been well trained on how to operate the machine.
Will inform manufacturer of any malfunctioning.

event this manual is lost or damaged, a new copy may be requested from this address:

ENOAGRICOLA ROSSI Srl

06018 Calzolaro di Umbertide – Perugia – Italy

Tel 075 / 930 22 22 Fax 075 / 930 23 28

If the machine is sold, please turn this manual over to the new owner.

SER’S AND MAINTENANCE MANUAL

Edition March 2010 -

Pagina 5 di 52

5

The machine has been designed in conformity with European machine safety standards and, in particular, the following

concepts and general principles of mechanical design. Technical

Are well informed on risks of this machine and dangerous areas and on the importance of not tampering with protection

event this manual is lost or damaged, a new copy may be requested from this address:

«
...
3
4
5
6
7
...
»

Содержание DM Series





















































Отзывы:

Нет отзывов