Section 9 – Adjustments for operation
Adjustment of the side rake disc.
Position the rake disc in order to have the greatest distance between the
forage and the windrow.
To set the disc in the correct position loosen the 4 screws pos. A and move to
right or left the disc support see fig.34. Once you reach the right position
fasten the 4 screws pos. A
Adjustment of cutting height.
The maximum and minimum cutting heights are obtained by changing the tilt
of the mowing bar, by varying the length of the third point
desired cutting height is obtained. The minimum height must be no less than
30 mm.
ROTARY DM 4-5
USER’S AND MAINTENANCE MANUAL
Adjustments for operation
Adjustment of the side rake disc.
in order to have the greatest distance between the uncut
To set the disc in the correct position loosen the 4 screws pos. A and move to
right or left the disc support see fig.34. Once you reach the right position
height.
The maximum and minimum cutting heights are obtained by changing the tilt
of the mowing bar, by varying the length of the third point C (Fig. 35), until the
desired cutting height is obtained. The minimum height must be no less than
SER’S AND MAINTENANCE MANUAL
Edition March 2010 -
Pagina 25 di 52
25
Fig. 34
Fig. 35