enorossi 16 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 72

enorossi 16 Series Скачать руководство пользователя страница 8

8

Rev. 0 04.10

You must remember that the transportation configuration entails
closing the side arms and fitting the equipment with the following
safety devices:

-

Tie rods (1) to be fitted in position on the arms and frame, and
locked in place with their relative safety pins;

-

End stop device (2) to be inserted on the rod of the jack (to
prevent it from retracting) and blocked with its respective safety
pin;

-

Device (3) on the front wheels to limit their movement;

You must also comply with your national road regulations.

•

Installation:  the  device  must  only  be  installed  on  agricultural  tractors
with  universal  three-point  hitch  system  at  the  back  and  with  hydraulic
lift.

IMPORTANT

The tractor must also, by law, be fitted with a protective roll-bar or
ROPS or FOPS cabin. It is strictly forbidden to install the rake
device on a tractor without the required protection.

Prior  to  installation,  however,  the  Customer  must  check  the  tractor's
operating  and  maintenance  manual  to  ensure  the  tractor  is  suited  for
use  and  operation  of  the  rake,  and  whether  ballasts  are  needed  to
prevent unbalancing that could cause it to tip over.

Instructions  on  installing  the  tiller  and  making  the  hydraulic
connections are given below.

2 m

1

3

2

6

1312

11

10

9

8

7

4

«
...
6
7
8
9
10
...
»

Содержание 16 Series









































































Отзывы:

Нет отзывов