enorossi 16 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 72

enorossi 16 Series Скачать руководство пользователя страница 11

11

INSTALLATION

C1 Rake assembly

As  mentioned  above,  the  equipment  is  fully  dismantled  for  delivery  to  the
Customer.  The  rake  can  be  assembled  quickly  and  easily  following  the
user-friendly instructions (see Page 18). Assembly must be carried out on a
flat surface prepared especially for the purpose.  Assembly operators must
be  knowledgeable  of  installation  safety  regulations  and  work  with  all  due
care and attention.

The  rake,  once  it  has  been  assembled,  can  be  installed  or  hitched  to  a
tractor.

C2 Hitching to the tractor

The rake can be hitched to the attachment of any agricultural tractor. To do
so, the operator must move the rake slowly to a position where the joints
can be easily aligned (1).

IMPORTANT

The holes in the tractor's attachment must be aligned with those on the
rake's attachment with maximum care and attention.

When the tractor is near the rake's attachment (type 1
or 2 – see picture), the operator turns the lever on the
foot  support  (2)  to  lift  or  lower  the  rake's  attachment
and  insert  it  in  the  tractor's  attachment.  The  operator
can  then  insert  the  locking  pin  (3)  through  the
attachment holes, as illustrated below, and secure it in
place with the relative safety pin (4).

Next,  the  operator  turns  the  lever  (5)  to  lift  the  foot
support  off  the  ground,  completing  the  tractor-rake
attachment  procedure.  The  foot  support  can  then  be
removed from its housing and inserted in the housing on the frame.

The operator therefore has to extract pin (6) to free pin (7), extract the latter
from  the  holes  of  the  foot  support  and  remove  the  foot  support  from  its
housing  (8).  The  foot  support  can  then  be  placed  in  the  housing  on  the
frame (9) and fastened with pin (7) and its relative safety pin.

C3 Hydraulic connections

•

The  rake  wheels  are  lowered  and  lifted  by  retracting  and  extending  a
jack,  while  the  side  arms  are  opened  and  closed  hydraulically  by
another  jack.  Both  jacks  are  powered  by  the  tractor's  auxiliary  circuit
and therefore commanded by their respective levers in the cabin. As a
result,  these  functions  can  only  be  carried  out  if  the  jack  connections

1

2

tipo 1

tipo 2

3

4

5

6

7

8

9

«
...
9
10
11
12
13
...
»

Содержание 16 Series









































































Отзывы:

Нет отзывов