EnOcean PTM 535BZ, Руководство пользователя

Страница: 18 / 112

USER MANUAL PREVIEW
PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER
© 2021 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535BZ User Manual | v1.0 | May 2021 | Page 18/112
3.3.5 Source address
The six-byte source address identifies the originator (sender) of BLE telegrams.
PTM 535BZ supports using either static source addresses or resolvable private addresses. By
default, PTM 535BZ uses static source addresses. PTM 535BZ can be configured to use re-
solvable private addresses as described in
Chapter 5.6.4 .
The type of address (static source address or resolvable private address) that is currently
used can be determined by the two most significant bits of the address; both address types
described in the following two chapters.
3.3.5.1 Static source address
Static source addresses are assigned during manufacturing and remain constant unless the
user configures a different source address via NFC.
Static source addresses are identified by the two most significant bits (Bit 47 and Bit 46 in
Figure 9 ) being set to
0b11
.
The structure of PTM 535BZ static source addresses is as follows:
◼
The upper 2 bytes of the source address are used to identify the device type and set
to
0xE215
for all PTM 535BZ devices (to ensure telegram compatibility with EnOcean
PTM 535BZ devices).
◼
The lower 4 bytes start with 0x1, are uniquely assigned to each PTM 535BZ during
manufacturing and can be reconfigured via NFC as described in
Chapter 5.6.6
PTM 535BZ static source addresses therefore have the format
0xE215:1xxx:yyyy
. This enables
easy distinction (based on the static source address) between PTM 535BZ devices and PTM
215B devices (which use the static source address format
0xE215:0xxx:yyyy
).
Figure 9 below illustrates the static address structure used by PTM 535BZ.
Figure 9 – PTM 535BZ static source address structure