Eno Scientific WS310 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 21

Eno Scientific WS310 Скачать руководство пользователя страница 4

PRODUCT OVERVIEW

The Well Watch 310 Display is a companion product to the Well Watch 660 series Well
Sounders. It allows wireless or wired connection to the well sounder and provide a
remote readout of the measured well water level as well as the ability to change key
settings in the remote device.

The unit includes a real time clock/calendar and provides a data logging capability to
record levels, time, and date information in a non-volatile internal memory. The data
can be uploaded to a computer through a USB connection. An RS232 port is also
available to allow a continuous data feed to a computer or data telemetry device.

High and low alarms can be set to alert the user that the water level in the well has
gone above or below the set levels.

The unit requires 9 – 12 VDC power which can be supplied by the included wall
adapter. Power can also be supplied to the Well Watch 660 through the display unit
when using a wired connection.

Eno Scientific Well Watch 310

Page 4

«
...
2
3
4
5
6
...
»

Содержание WS310






















Отзывы:

Нет отзывов