WANT TO LEARN MORE?
You’ll find all the information you need to take all kinds
of measurements with the eM860T multimeter in the
detailed user manual downloadable at our website.
QUESTIONS? NEED ADDITIONAL SUPPORT?
(541) 525-9175
ENNOLOGIC TRUE RMS MULTIMETER EM860T-QUICK-START GUIDE
4
FREQUENTLY ASKED QUESTIONS
What if I forget to turn off the multimeter?
To conserve battery power, the meter enters “Sleep mode” and blanks the
display if it is on but not used for 15 minutes.
Press the key or turn the rotary switch to wake the meter up.
To disable Sleep mode, hold down the
SELECT
key while turning the meter on.
What is the NCV function, and how do I use it?
NCV stands for Non-Contact Voltage detect. It allows you to detect AC voltages
in a cable or circuit without making an electrical connection with the test
leads. The NCV function is mainly intended for scanning for a break in power
cords. It should not be relied upon exclusively as the only instrument for
testing if it is safe to work on an electrical system.
To use it, set the rotary switch to the / V~ mode. Press the
SELECT
key to
switch to
NCV
detect mode. Hold the EF-DETECT area at the top of the Meter
close to the AC power cable or power socket. If AC voltage is present, the
meter will beep, and one or more bar symbols “-“ will be displayed on the LCD.
The lowest detectable voltage is around 50V, 50/60Hz.
