7. Hotspot Configuration
（
1
）
Start the doorbell
Connect power supply to start the equipment,then heard a short music ( start time approx 40 seconds ),then the doorbell will connect to
network.There are 2 ways of network connection: wireless WIFI and network wire.
A. If connect a network wire to your wireless router,then the doorbell will connect to your network automatically,voice hint “Open
Service”,now go to the step 3 .
B. If don’t connect the network wire to doorbell,the doorbell will connect to your network by wifi,then will be a voice hint” Hot mode”.
（
2
）
One Button Configuration
The operation is different between Android and IOS mobile phone,the details as below:
A. For Android
：
First,connect mobile phone to the wireless wifi network,then start APP software.Now the color of icon“HOLDJOY” is
white (if the color is gray,then shows the network is abnormal ): Click “Doorbell set up”,then click “One button
configuration”,now the “Family wifi name ”shows your home wireless wifi name,then input the wifi password,click “One
button configuration”,if hear voice hints “Open Service”,shows the configuration succeed,then go to the step 3.If there is
any problem,check as below:
A1. Check the “Show advanced options”,the encryption mode must be the same as your wireless wifi router,example: on doorbell,it is WPA
PSK,on your wireless wifi router,the encryption mode is also WPA/WPA2 PSK.
A2. Question:
“
Please input the family wifi name”;
Answer: The wifi of mobile device needs to connect to your home wireless wifi router,please input home wifi name.
A3. Q: “Please input the wifi name and password”;
A: input home wifi name and password.
A4. Q: “Check password timeout,please restart after checking”;
A: maybe input wrong password,please input the correct password to try again.
A5. Q: “ Search the doorbell timeout,please check the doorbell is on state”’;
A: The hot configuration of doorbell disappear,the hot configuration of doorbell only has 5 minutes,please restart the doorbell to try
again.
A6. Q: “Connect the doorbell timeout,please connect again or restart the doorbell”;
A: The hot configuration of doorbell disappear,please restart the doorbell to try again.
A7. Q: “Configure the doorbell timeout,please try again or restart the doorbell” ;
A: maybe the configuration succeed,can wait a moment to check if voice hints “Open Service”,or restart the doorbell to try again.
A8. Q: “Re-connect the family wifi timeout,please try again or restart the doorbell”;
A: In fact the configuration succeed,can ignore this hints,go to the step 3.
A9. One button configuration completed,please add doorbell”,please go to the step 3.
