Enlaps TIKEE 3, Руководство пользователя, Страница: 42 / 48

41
Maintenance and cautions
A microfiber cloth is included in the package. You can use it to ensure the maintenance of the
camera.
Follow the instructions below to get the best performance from your Tikee.
The camera is guaranteed IP66. If the cap protecting the micro USB slot or the microSD and
microSIM slot are opened, the waterproofness of the Tikee is not guaranteed
Make sure that all of the caps are closed before use to ensure water-resistance.
About the waterproofing of Tikee:
- Do not immerse. - Check and guarantee the closing of the caps.
- Inspect Tikee from the outside. - Do not expose / use a damaged Tikee.
Electrical characteristics :
Supply voltage at the external and micro-USB connectors should be b4.5 Vdc up to +5.5
Vdc (+5 Vdc typical).
Use AC/DC/ power supply tpe LPS, Limited Power Source (according to IEC EN 60950-1 Ed2) or
type ES1, PS2 (according to IEC EN 62368-1).
Consumption max under 5Vdc : 1500 mA
Built-in-Lithium battery : Typical voltage : 3.6V / Typical capacity 24Ah
Temperature range :
Operating temperature: -10° C / + 50° C
Storage temperature: -25° C / + 60° C
Charge temperature : 0°C / +45°C
Info: Tilt the solar panel so as not to increase the temperature in the Tikee. Indeed, a solar panel
heats up and can increase the temperature of the Tikee’s casing by a few degrees. Tilting the
panel allows air to circulate between the panel and the Tikee’s casing.
Before closing the covers, make sure that no debris is on the seal. If necessary, clean it with a
cloth.
Before opening the covers, make sure that the camera is free of water and debris
If the camera is dirty, you can clean it with a damp soft cloth.
To clean the lenses, wipe them with a soft cloth. Don’t insert any foreign object around the
lenses.
If necessary, clean the solar panel. To do this, use clear water with a soft cloth.
Special precautions:
- Do not store Tikee with a discharged battery (level below 50%).
- Do not insert objects (or metal) into the microSIM and microSD card slots.
If there are signs of condensation or moisture inside a lens, turn off the Tikee (do not charge) and
contact customer support.
Enlaps support
For questions relating to your Tikee camera or mobile & cloud platform, you can read our FAQ :
https://help.enlaps.io/en/
7. Maintenance and cautions