Enlaps TIKEE 3, Руководство пользователя, Страница: 10 / 48

9
Starting up the Tikee
3. Starting up the Tikee
First connection and first settings
By connecting to the Tikee camera with the Tikee Remote mobile application:
- Check that the latest update is installed. If this is not the case, update by reaching this
link :
https://enlaps.io/en/download
- Check the battery status. A full charge (= 100%) is necessary
- For a connected use ; check network quality. Achieve and validate a connection test. See
page 15 .
Framing and installation recommendations of the Tikee
For a shooting of a few hours, your Tikee can be installed on its rubber sole on a sufficiently flat
and not tilted surface or on a camera tripod.
For a shooting of a few days or months, we recommend to use a rigid support to ensure consistent
framing over time and secure the position of your Tikee. You can find our recommended set of
accessories for your Tikee on our store at : https://enlaps.io/en/accessoires.html
To avoid theft and/or acts of vandalism, place your Tikee in a discreet high up location, and
use an anti-theft system (your Tikee has a dedicated anti-theft insert).
Important: To ensure the smooth running of your sequence ;
It is advisable to monitor the Tikee on site in order to see its general condition (fastening, solar
panel and lens cleanliness, etc.). It is also essential to check the proper functioning of your Tikee
on your myTikee account: battery status, microSD card status, network status, date of the last
connection, etc.
Caution : An indicative period of 3-4 months between maintenance is recommended to
check all these elements, so plan to have access to your Tikee. Some installation sites may
require special care (very dusty areas for example).
Caution : Be sure to respect the safety instructions related to working at heights and every
recommandation of security and installation of the site where your place your Tikee.
Be sure that the proper installation of the fixing support and of the Tikee are correct to
prevent falls.