SETTING
UP YOUR
EBIKE
03
SETTING UP YOUR EBIKE 4
When shipped, your bike arrives securely packaged,
but bolts may become loose and other parts can come
out of alignment during transit. It is important that you
inspect and correctly set up your new bike before riding
to minimize the risk of injury.
Follow the below steps to correctly unbox your new
Miller SE ebike.
A. REMOVE FROM BOX
B. REMOVE ZIP TIES AND PADDING
C. INSTALL HANDLEBAR
D. UNFOLD THE EBIKE
INSIDE THE BOX:
1 x Miller SE ebike
1 x smaller box containing a battery charger and cable.
1 x smaller box containing reflectors and pedals.
Any extra items that you may have ordered will also be
included in the box.
UNBOXING
In order to correctly setup your Miller SE ebike, you will
need the following tools:
1 x 6mm allen wrench
1 x 5mm allen wrench
1 x 3mm allen wrench
1 x flat head screwdriver
1 x small phillips head screwdriver
1 x 18mm spanner
1 x 15mm spanner
1 x bicycle tire pump with presta valve attachment
TOOLS YOU WILL NEED
Your Miller SE ebike ships securely as pictured above.
Open the box from the top and with the help of another
person, lift out of the box.
Place the bike on the ground carefully ensuring it stays
upright with the bike resting on the wheels and bottom
guard.
A. REMOVE FROM BOX
YOUR MILLER SE EBIKE IS HEAVY,
AND IT IS RECOMMENDED THAT YOU
ENLIST THE HELP OF ANOTHER PER-
SON TO AVOID INJURY.
WHILE WE TAKE EVERY CARE POSSI-
BLE TO ENSURE YOUR EBIKE REACH-
ES YOU IN THE BEST CONDITION
POSSIBLE, VIBRATIONS FROM SHIP-
PING, TRANSIT AND GENERAL HAN-
DLING CAN CAUSE BOLTS AND FAS-
TENERS TO LOOSEN. IT’S IMPORTANT
THAT YOU CHECK ALL BOLTS, NUTS
AND FASTENERS TO MINIMIZE THE
RISK OF INJURY WHEN YOU RIDE.
