SETTING UP YOUR EBIKE 12
Miller SE EBIKE USER MAN-
Your new Miller SE ebike comes equipped with a display
and integrated keypad to allow you to operate and cus-
tomize your ebike riding experience, as well as navigate
through trip and system information. References to these
buttons will be made as Power (1), Mode (2), Up (3), and
Down (4).
To power on the ebike, locate the Power button at the
top of the display and hold for a few seconds until the
display turns on.
Similarly, to power off the ebike, hold down the Power
button for a few seconds until the display turns off.
When powered on, pressing the Mode button will cycle
through the various speed interfaces of real time speed,
distance travelled, time, average speed and maximum
speed and odometer.
The battery icon at the bottom of your display indicates
the state of battery charge in 20% increments.
0 bars = empty
1 bar = 0%-20%
2 bars = 20%-40%
3 bars = 40%-60%
4 bars = 60%-80%
5 bars = 80%-100%
.
Pressing the Up and Down buttons will increase or de-
crease your pedal assist level (PAS), as indicated by the
numbers at the top of the screen.
OFF = No pedal assist selected
1 = PAS 1
1 2 = PAS 2
1 2 3 = PAS 3
1 2 3 4 = PAS 4
1 2 3 4 5 = PAS 5
DO NOT LEAVE THE BATTERY IN AN
EMPTY STATE OF CHARGE OR YOU
RISK PERMANENTLY DAMAGING THE
BATTERY.
9. DISPLAY
2
4
1
3
