ENKHO 166893.01, Руководство пользователя

Страница: 27 / 56

GB
- 27 -
3. Preparing for use
3.1 Attaching the disc guard cover
using the quick-release fastener
WARNING!
DANGER OF INJURY!
Pull the mains plug out of the mains
socket before you carry out any task
on the device.
DANGER OF INJURY! Always use the
If a dangerous situation arises, pull the
mains plug immediately out of the mains
socket. Ensure that the device and the
mains plug are easily accessible and can
be reached quickly in an emergency.
When taking a break from your work,
before carrying out any tasks on the
device itself and when you are not using
the device, always pull the mains plug
out of the mains socket. Always keep the
device clean, dry and free of oil or grease.
Remain alert at all times! Always watch
what you are doing and proceed with
caution. Do not use the device if you
cannot concentrate or you are feeling
unwell.
Turn the disc guard cover (7) into the
desired position (working position). The
closed side of the disc guard cover (7)
must always be facing the operator (Fig. 3).
Close the clamping lever (8) to firmly clamp
the disc guard cover (7) in place.
If necessary, the clamping force of the
connection can be adjusted by tightening
or loosening the adjuster screw (10).
Ensure that the disc guard cover (7) sits
firmly on the spindle collar.
3.2 Attaching the auxiliary handle (Fig. 4)
CAUTION! For safety reasons this device
must always be used with the auxiliary
handle (6) in place. Otherwise, you could
become injured.
WARNING!
DANGER OF INJURY!
Pull the mains plug out of the mains socket
before you carry out any task on the device.
Screw the auxiliary handle (6) on the left,
right or on the top of the head of the
device.
Open the clamping lever (8) (Fig. 1/5).
Insert the disc cover guide (7) with the
locking pin (9) in the coded groove (16) .
disc guard cover (7) is attached so that its
edge is beyond the angle of the auxiliary
handle (6) (Fig. 2). Otherwise you could
injure yourself against the grinding disc.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certainresidual
risks cannot be rules out.
The following hazards may arise in connect-
ion with the equipment’s construction and
layout:
1) Lung damage if no suitable protective
dust mask is used.
2) Damage to hearing if no suitable ear
protection is used.
3) Health damage caused by hand-arm
vibrations if the equipment is used over a
prolonged period or is not properly guided
and maintained.
angle grinder with the disc guard cover in
place. The disc guard cover must be securely
attached to the angle grinder. To ensure the
highest level of safety while using the device,
ensure that the smallest possible area of the
grinding tool is exposed to the operator at
all times. The disc guard cover is there to
protect the operator from pieces breaking
off and accidental contact with the grinding
tool.
DANGER OF INJURY! Ensure that the