46
INSERTING USB MEMORY DEVICES
If necessary, remove the protective cap and insert the USB memory devices into the
USB
port on the top of the party speaker.
Press the
/FUNC.
button once or several times until
USB
is shown on the display.
Observe the following instructions regarding usable USB memory devices:
• Due to the numerous different file systems and file formats, the connected storage
media cannot be guaranteed to function.
• Depending on the size of the data medium, it may take some time for the system to
be detected.
• USB memory devices with a maximum memory capacity of up to 32 GB are supported.
• Supported file systems are FAT16 and FAT32. The supported file format is MP3.
• External hard disks are not supported.
• USB extension cables are not supported.
The
USB CHARGE
port is intended exclusively for charging external
devices (e.g. smartphones) using an appropriate USB charging cable (not
supplied), see section “Charging an external device via USB” on page 49.
CONNECTING THE DEVICE VIA BLUETOOTH
®
In Bluetooth mode, you can receive audio signals wirelessly from an external Bluetooth-
enabled device. Make sure the two devices are not more than 10 metres apart.
Only one Bluetooth device can be paired with the party speaker at a time.
To connect a Bluetooth-enabled audio output device, proceed as follows:
Switch the party speaker on.
Press the
/FUNC.
button once or several times as required to switch back to
Bluetooth mode.
BT
is shown on the display and the device is in search mode. During the search, the
Bluetooth LED
PAIR
flashes blue quickly.
The party speaker attempts to automatically connect itself to the last audio
output device connected via Bluetooth. If this is not possible, the device
remains in search mode.
Switch on the Bluetooth function on your audio output device and activate search
mode on it to pair the two devices.
You will find more information about the Bluetooth function of your audio
output device in its user manual.
