EN
18
2. Introduction
The operating instructions contain important
information on safety, use and disposal. It is
essential that you read the instructions before
assembling, operation and maintaining the
product. Use the product only as described and
for the applications specified. Keep this manual
safely and in the event that the product is
passed on, hand over all documents to the third
party.
Intended Use
The 3-in-1 sander is intended for dry sanding
of wood, metal, plastic, plaster and painted
surfaces. The device is flexible and suitable
for surface grinding and for grinding of edges,
corners and hard-to-reach places. The device is
not suitable for commercial use.
The device is designed for use by adults.
Adolescents over the age of 16 may use the
device only under supervision. The manufacturer
is not liable for damages caused by unspecified
use or incorrect operation.
Andy other use that is not explicitly approved in
these instructions may result in damage to the
device and represent a serious danger to the
user.
Features (Fig.A - G)
1.
Oscillation frequency controller
2.
Ventilation holes
3.
On/Off switch
4. Handle
5.
Mains cable
6.
Connection for dust extraction
6a. Two lugs on the dust extraction
7.
Release button of the dust collection box
8.
Dust collection box lid
9.
Tab for opening the dust collection box
10. Dust collection box
10a. Two grooves of the dust collection box
11. Adapter for external dust extraction
12. Orbital sander disc
13. Terminal strip for clamping sandpaper
14. Clamping lever for clamping sandpaper
15. Sander motor unit
16. Case
17. Eccentric grinder disc
18. Triangle sanding plate
19. 2 sanding sheets for orbital sander disc
20. 2 sanding sheets for eccentric grinder
disc
21. 2 sanding sheets for triangle sanding
plate
22. 4 Philips screws for mounting the sanding
disc
23. Movable mounting plate
24. Threaded bore
25. Marking
26. Felt ring
27. 4 rubber pins
Scope of the delivery
1x sander motor unit
1x triangle sanding plate
1x eccentric grinder disc
1x orbital sander disc
6x sanding sheets (grain size P80 /P240)
- 2 x for triangle sanding plate
- 2x for eccentric grinder disc
- 2x for orbital sander disc
1x dust collection box
1x adapter for external dust extraction
4x replacement Philip screws
4x replacement rubber pins
1x case
1x instruction manual
Technical data
Rated voltage
230-240V~, 50Hz
Rated power
220W
Rated no-load/ no:
7000-12000/min
Rated Oscillation rate: 14000 – 24000 /min
Degree of Protection: IPX0
Protection class:
II/
Weight (without
sander disc and dust
collection box) :
1.38 kg
Noise emission value according to EN 62841-
2-4
Sound pressure level
L
PA
78.4 dB(A)
Sound power level L
WA
89.4 dB(A)
Uncertainty K
3dB
