EN
30
• Once the item is fully deflated, switch off
the appliance by pressing ON/OFF switch (6)
again.
• Now remove the adapter nozzle (9), (10), or
(11).
Adapters
Adapter nozzle (9): For standard valves with
an internal diameter of 8mm.
Adapter nozzle (10): For inflatable items
with a screw valve. Deflation is only possible
with an unscrewed valve and with this
adapter.
Adapter nozzle (11): For inflatable items
with a deflation valve.
NOTE:
The LED work lamp (7) lights up as
soon as you press the ON/OFF switch (6). This
allows illumination of the working area while
inflating in low light conditions; when switch
off the product, the LED work lamp turns off
accordingly.
6. Operation the 20V compressor
154697.01-A
This appliance is not designed for continuous
operation. It may be used for a maximum of 10
minutes continuous operation. If the appliance
overheats, remove the battery pack, allow the
appliance to cool down completely and then try
to use it again.
Display indicator
• Press the ON/OFF button on the display (14)
or press the ON/OFF switch (16) to switch
on the display indicator (12);
• The last set pressure is display for 2
seconds.
• After two seconds, the current pressure of
the connected item is shown.
NOTE:
If the compressed air hose is not
connected to a suitable item, the display
indicator (12) shows “0”.
• If the display indicator (12) is switched on,
you can switch between “Bar” and “psi” by
pressing the ON/OFF button (14).
• To switch off the display indicator (12),
press the ON/OFF button (14) for 3
seconds.
NOTE:
The compressor will not work if the
display indicator is switched off.
NOTE:
The LED work lamp (17) lights up as
soon as you press the ON/OFF switch (6). This
allows illumination of the working area while
inflating in low light conditions; when switch
off the product, the LED work lamp turns off
accordingly.
Setting the Pressure
• Hold down the “+” (13) or “-“ (15) button
till the display flashes.
• Press the “+” (13) or “-“ (15) button to set
the desired pressure.
• Once you see the desired pressure on the
display indicator (12), do not press any
button for about 3 seconds.
• The desired pressure is now set.
NOTE:
The display indicator (12) (and thus the
compressor switches off after about 3 minutes
of inactivity.
Initial Operation
• Loosen the union nut (20) (do not unscrew
it completely), twist in the compressed air
hose threaded connection (19) and tighten
the union nut (20).
• Select the desired pressure.
• Insert one of the supplied adapters (22-
27) tightly onto the compressed air hose
adapter (18).
• Connect the adapter or to the object to be
inflated.
• Press the ON/OFF switch (16).
• The compressor switches off automatically
when you reach the preset pressure.
• Pull the adapter out of the inflated item.
Adapters (22-27)
Ball needle (22): the ball needle can be used to
inflate various balls.
Valve adapter (23): the Presta valve can be
used for inflating bicycle tyres.
Valve adapter (24): the Dunlop valve can be
used for inflating bicycle tyres.
Universal adapter (25): the universal adapter
can be used to inflate air mattresses or similar.
