ENKHO 154696.01, Оригинальное руководство пользователя

Страница: 19 / 53

EN
19
2. Introduction
The operating instructions contain important
information on safety, use and disposal. It is
essential that you read the instructions before
assembling, operating and maintaining the
product. Use the product only as described and
for the range of applications specified. Keep this
manual safely and in the event that the product
is passed on, hand over all documents to the
third party.
Intended Use
The product is intended exclusively for the
waxing and polishing of paint finishes applied
to vehicles, boats and caravans. Any other uses
or modification to the product are deemed to
be improper usage and carries a significant
risk of accidents. The manufacturer accepts
no responsibility for damage(s) attributable
to misuse. This product is not intended for
commercial use.
Scope of the delivery
Carefully unpack and check that it is complete:
- 1x Battery-operated polisher
- 1x Terrycloth bonnet
- 1x Synthetic polishing bonnet
- 1x Battery pack 2.0Ah
- 1x Battery charger
- 1x Instruction manual
Overview (Fig. A+B)
1. Battery pack
2. Battery release button
3. Hand grips
4. Buffing plate
5. ON/OFF switch
6. Terrycloth bonnet
7. Synthetic polishing bonnet
8. Battery charge level button
9. Battery level indication (LED)
10. RED Charge control LED
11. GREEN charge control LED
12. Charger
Technical data
20V polisher 154696.01
Rated voltage 20V d.c.
Rated no-load speed,
no:
3000/min
Diameter of the base 24.5cm
Weight (without
charger)
2.1kg
Battery pack 151218.01
Type Li-ion
Rated voltage 20V d.c.
capacity 2.0Ah (40Wh)
Quick charger 151220.01
Rated input 230-240V, a.c., 50Hz
Power consumption 65W
Rated output 21.5V d.c.
Charging current 2.4A
Charging time Approx. 60min
Protection class II
Noise emission value
Noise measurement value determined in
accordance with EN 62841-2-4
L
PA
66.4dB(A)
Uncertainty K 3dB
L
WA
77.4 dB(A)
Uncertainty K 3dB
Vibration emission
value
Vibration value determined in accordance
with EN 62841-2-4
a
h
9.145m/s
2
Uncertainty K 1.5 m/s
2
- The declared vibration total values and
the declared noise emission values have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
- The declared vibration total values and the
declared noise emission values may also
be used in a preliminary assessment of
exposure.