6 / 7
1
2
I.
Align the 2 aprons (#3) with the
brackets of the leg stand (#1).
II.
For each bracket of the leg stand
(#1), insert 2 bolts (#A) through the
bottom of the bracket and 2 bolts
(#A) through the side of the bracket
using the Allen wrench (#C) to
secure them wit h the apron (#3).
III.
Align one end of the leg stand
support (#4) with the pre-drilled
holes on the center of the same leg
stand (#1).
IV.
Insert 2 bolts (#A) through the
bracket of the leg stand support (#4)
using the Allen wrench (#C) to
secure them with the leg stand (#1).
V.
Repeat the process above to
assemble the other leg stand (#1)
onto the other ends of the 2 aprons
(#3) and the leg stand support (#4).
I.
With the help of another person,
carefully place the table top (#2)
facing down on a protected surface.
II.
Align the assembled leg stands (#1)
WR
the table
WRS
t
DEOHWRSKDVQRSUHGULOOHGKROHV
III
Secure 6 screws (#B) through the 2
leg stands (#1) and 4 screws (#B)
through the 2 aprons (#3) using a
Phillips screwdriver to secure them
with the table top (#2).
IV.
Carefully place the completed table
upright. Make sure the table is rested
on a flat surface and does not feel
loose or wobbly. If it does, double
check that the bolts/screws are
secured and properly tightened.
Part
#1 x 2pcs
Part
#3 x 2pcs
Hardware
#A x
20pcs
Part
#4 x1pc
Hardware
x 10pcs
Part
#2 x1pc
#B
Содержание CM3615T-60
Страница 4: ...4 7 ...
Страница 7: ...7 7 3 ...
