Enigma XS2 Wheelchair
Page 5 of 12
2.
Armrests
Press the lever at the front of the armrests
to release the front of the armrest. The
armrest can now be flipped up.
To remove, first flip up the armrest then
pull the lever (arrowed) and the armrest
can be removed by pulling upwards on the
tubing.
3.
Quick Release Wheel.
On the self propel model, the rear wheels can be removed. To remove the
rear wheel, push the button in the centre of the wheel hub and slide the
wheel from its axle.
4.
Half Folding Back. Follow the previous instructions to fold the back.
5.
Folding the wheelchair.
Remove the seat and back cushions. Then grab the centre of the front and
rear edges of the seat sling. Pull upwards on the seat sling and the wheelchair
should naturally fold up.
See back page for details on restraining the wheelchair in a motor vehicle.
using the stepper tube
Use the stepper tube to raise the front castors (when mounting a kerb for
example). To use, push down on the stepper tube with a foot. Do not raise the
front castors by pushing down on the push handles as this could result in
damage to the wheelchair.
To mount a kerb. Approach the kerb head on. Then the attendant uses the
stepper tube to raise the front castors, and lowers the front castors on the
raised kerb. Finally the attendant should push the wheelchair forward, lifting it
up slightly to mount the kerb if required.
