Enigma XS2 Wheelchair
Page 3 of 12
adjustment features
A number of adjustments may be made to the wheelchair to suit a user’s
individual requirements:
i.
Rear Wheels. Use the axle bracket to alter the vertical or horizontal
position of the 24” self-propel wheel, or the horizontal position of the
12½”. Remove the two screws and nyloc nuts and reposition as required.
Reattach the fasteners and alter the brakes as required. We
recommend this is adjusted by your Drive Medical dealer.
ii.
Upholstery. This wheelchair features a tension adjustable back canvas.
To adjust the tension, first remove the cushion and then adjust the
Velcro straps. Ensure the straps are not too taut as this can damage
the wheelchair.
iii.
Brake Adjustment. Adjustment is made to the brake by loosening the
Allen key bolt heads and by sliding the brake unit along the frame. The
brakes will have to be readjusted if the rear wheel position has been
altered. We recommend this is adjusted by your Drive Medical dealer.
iv.
Leg Rest Adjustment. The leg rest height and footplate angle can be
adjusted. To alter the leg rest height, remove the Allen head bolt and
nyloc nut. Reposition as required, and then resecure fasteners. To alter
the footplate angle, loosen the allen head bolt on the plastic footplate.
Reposition as required then retighten bolt.
v.
Adjusting the Arm Pad Position. Press the silver button on the arm pad
and push the arm pad forwards and backwards to the required
position.
vi.
Adjusting the Anti-Tip Wheels. See the Using a Stepper Tube section.
