Changing Viewing Modes
VGA to USB
1.) Plug in the included USB cable to the Transformer
dongle labeled “USB” and to an available USB port on the
computer.
2.) Run the EV Viewer software on your computer. The
Transformer will not power on unless the EV Viewer
software is running.
USB to VGA
1.) Unplug the USB from the computer and from the dongle
of the Transformer. The Transformer will be in standby mode
2.) Plug in the included VGA cable to the dongle labeled
“VGA” and to the VGA monitor.
3.) Press the “Power Button” on the Transformer
(see page 12)
* The Transformer will not power off when the VGA monitor
is powered off or when the VGA Cable is unplugged. Press
and Hold the “Green power button” on the Transformer for
about 3 seconds, or until the “Battery Charge Indicator Light”
turns off.
* The USB port on the Transformer will take precedence
over the VGA port. When the USB cable is plugged into the
computer and to the Transformer, while the VGA cable is
connected, the Transformer will automatically switch to USB
mode.
34
*M
