ENHANCED VISION DaVinci Pro, Руководство пользователя

Страница: 23 / 60

23
Factory Default Color 2
In factory default this mode provides a black background with yellow text. To change
this mode to any of the 28 available please review page 40 under preferred color modes.
Factory Default Color 3
In factory default this mode provides a yellow background with blue text. To change this
mode to any of the 28 available please review page 40 under preferred color modes.
User Defined Color 4
In factory default this mode is turned off. Review page 40 to turn this color mode on.
User Defined Color 5
In factory default this mode is turned off. Review Page 40 to turn this color mode on.
Enabling Line & Window Markers
(CCTV Mode ONLY)
1. Line & Window Markers can toggled on or off for use in the live CCTV mode.
2. When particular Line & Window Markers are enabled they will appear when cycling
through your options as mentioned in the following section Cycling Between Line &
Window Markers.
3. Press the “[Mode] and [CCTV/OCR Toggle]” buttons located on the Front Panel, or “[Mode
Up] and [Find/Enter]” on the Control Console, to enter the Menu. Then choose User
Settings >> Display
4. You should see two options “Line Markers” and “Window Markers”
Select the Option you would like to change with [Find/Enter].
5. Two Options should be visible under this Sub Menu
Horizontal & Vertical
6. A Black Square indicates that the feature is enabled and will appear in the cycle rotation
and a White Square indicates the feature is disabled and will not appear in the cycle
rotation.
7. You can enable or disable all available Line and Window Markers depending on your
preference.
Cycling between Line & Window markers:
Rotating the [Marker Wheel] on the right hand side of the
Control Console will allow you to toggle through the Marker
Options which is dependent on your user settings.
If you do not see the Marker or Window Setting you would like try
Figure 11 Marker Wheel