-4-
V084030-H June 08
Kohler Co.
Select the correct seal ex-
tension and slide into place
as shown.
Clip the drip edge seal onto
the bottom of the glass.
6.
Drill holes into the hinge
post using a 3mm drill bit.
The guide holes on the wall
retainer will assist here.
Lock the hinge post in place
using the No. 6 x
3
/
8
”
screws.
Fit screw caps over the top
of the screws.
5.
Using recommended
Sealant, seal full height
between walls and Wall
Retainer Profi les, and all
other exterior joins.
7.
IMPORTANT:
SEALANT
SHOULD BE APPLIED TO ALL
OUTSIDE JOINTS – DO NOT
SEAL FROM INSIDE.
SEALANT APPLICATION
Follow the sealant manufacturer’s
dirrections. Some sealants may
require primer.
NEW ZEALAND
KOHLER NZ Ltd.
133 Diana Drive,
Glenfi eld,
Auckland.
Ph (09) 980 6800
Fax (09) 980 6899
[email protected]
www.kohler.co.nz
CALL US FOR HELP
AUSTRALIA
KOHLER Co.
Unit 10, 70-99 St. Hilliers Road,
Auburn,
Sydney. NSW 2144.
Ph (02) 9714 3900
Fax (02) 9714 3966
[email protected]
www.kohler.co.nz
All rights reserved to alter designs and specifi cations without notice.
WARNING: Products in this leafl et are subject to Industrial Property Protection. All dimensions given are approximate only.
© Copyright Kohler NZ Ltd 2008
