V084012-F October 07
Kohler Co.
-5-
SEALANT APPLICATION
STEPS
Cut tip of silicone tube nozzle at
45
O
angle.
b.
Hold the tube at 45
O
angle
and push forward as sealant fills
the joint.
c.
The surface of the sealant can
be smoothed (before surface
dries) by using a finger dipped
in a small quantity of water with
one drop of washing liquid add-
ed.
d.
Excess sealant should be
removed immediately with a
damp cloth.
PART TWO
SEALANT APPLICATION
Ensure all joints are clean and
dry before applying sealant.
CAUTION: Avoid contact with
skin, eyes and mouth and avoid
breathing vapour. If in eyes, im-
mediately flush with water.
If irritation persists, seek medi-
cal attention.
Keep out of reach of children.
Seal full height the joint
between the Walls and the
Wall Retainers.
b.
Seal joint between the Door
Sill, the Return Panel and the
Shower tray.
IMPORTANT
SILAFLEX NG SEALANT SHOULD BE
APPLIED TO ALL OUTSIDE JOINTS.
DO NOT SEAL FROM INSIDE.
6mm
45°
1a.
Sealant
c.
To a height of 100mm, seal
joints between Door Frame &
Corner Post and Door Frame &
Wall Retainer.
d.
Seal up to the PVC gasket
joints between Return Panel &
Corner Post and Return Panel &
Wall Retainer.
IMPORTANT
ALLOW 24 HOURS FOR SEALANT
AND ADHESIVE TO CURE BEFORE US-
ING THE SHOWER.
2a.
