V084012-F October 07
Kohler Co.
-4-
Position Return Panel PVC
gasket by pushing outside
leg into both Wall Retainer and
Corner Post. It should ‘snap’ into
place. Now push the inside leg
into place.
13.
Drill 2.5mm holes ( NOTE:
DO NOT USE BIGGER DRILL
BIT) through punched holes at
top and bottom of each Wall Re-
tainer and Corner Post to secure
door and return. Make sure Door
and Return assemblies do not
move during this operation. Fit
screw, screw caps and remove
tape.
Remove screws from
corner of door at each 45
O
post in turn and fit corner brack-
ets. Fit screw into top of Return
Panel as shown.
11.
12.
DO NOT PROCEED TO STEP 12 UNTIL
DOOR IS OPERATING CORRECTLY.
6g x
3/8
"
screw
45
O
CORNER POST
Inside Shower
Outside Shower
Push ouside leg
Push inside leg
RETURN WALL RETAINER
