background image

-4-

V087600-A02-M     07-09-2012   

Kohler Co.

CAUTION: BEFORE DRILLING

HOLES ENSURE THERE ARE NO

ELECTRIC CABLES OR WATER

PIPES BEHIND WALLS.

DRILLING INTO THESE CAN

ENDANGER LIFE AND PROPERTY.

  Tape over waste outlet.

  Bath MUST be installed level.

SCREW No.8 x 65 mm

BRICK
CONSTRUCTION

SCREW No.8 x 65 mm

6.0mm 

NYLON    
ANCHOR

BRICK

NYLON    

 

 

 

 

 

 

 

 

 

 

 

 

Position Hinge Post retainer central 
 on top of bath Tiling Bead.

Using a 3mm drill bit, mark position 
of holes on wall through extrusion.  
Fix with Screw No.8 x 65mm.

Insert Hinge Post over Wall 
Retainer and slide down into
position on Bottom Cap.

3.

  

4.

  

Set adjusting screws using 
6mm spacer provided.

ASSEMBLED UNIT

1.

1.

2.

  Bath 

  Bath 

WALL
RETAINER

HINGE POST

L/H SIDE PANEL

R/H SIDE PANEL

 

Fit Bottom Cap to Hinge Post    

         Retainer.

 

Fit Bottom Cap to Hinge Post    

         Retainer.

CAUTION: Fixing the retainer only to 
the backboard may void warranty as 
a backboard by itself is not able to 
provide enough support for the bath 
screen.

 

Ensure Hinge Post Retainer

3.

3.

         profile is plumb.

3.

3.

Anchor Hinge Post Retainer into

wall stud for maximum support. 

TIMBER

TIMBER
CONSTRUCTION

CONSTRUCTION

Содержание PREMIUM BATHSCREEN







Отзывы: