Englaon LED22M60, Руководство пользователя

Страница: 11 / 21

Turning the TV On and Off
Basic Operation
OSD Menu Operations
15
16
1. Insert the power cord plug into a polarized DC outlet.
2. Press POWER button on the remote control or
button on the LED TV.
3. Normal picture will be displayed on the screen after
6 seconds. If no signal input, "No Signal" will be
displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or
button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.
Auto power - off
If there is no signal input in any Mode, the TV will automatically accesses the standby
state in about 15 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
How to turn the TV on or off
First Time Installation
Language
Country
Energy Mode
< >
< >
< >
English
Australia
Store Mode
Auto Tuning
OK
Step one: It shows “OSD Language”for you to choose when boot for the first time
Step two: enter “Country” menu
Step three: Enter “Energy” menu
Enter “Tune Type” menu
Tuning Setup
Tune Type
Digital Type
Scan Type
< >
< >
DVT + ATV
DVB-T
Full
Network ID
Frequency
Symbol Rate
Auto
Auto
Auto
Start
OK
Back
MENU
Input Source
There is 9 ports at most in Input Source menu page. It supports
DTV/ATV/DVD/AV/YPbPr/HDMI1/HDMI2/SMART TV/USB.
HDMI1
HDMI2