England's Stove Works 10-CDV Скачать руководство пользователя страница 29

 

29

Have this information on hand if you phone the factory or your dealer regarding this product. 

 
Retain for your files: 
 
Model Number __________________________ 
Date of Purchase ________________________ 
Date of Manufacture _________________  Serial #_____________________ 

 

LIMITED 5 YEAR WARRANTY  

FROM THE DATE OF PURCHASE TO THE ORIGINAL OWNER 

 

The manufacturer extends the following warranties: 

Five Year Period: 

1.  Carbon steel and welded seams in the firebox are covered for 5 years against splitting. 
2.  The cast iron door and hinges are covered for 5 years against cracking.  
 

One Year Period: 

3.  Component parts such as the hopper, auger burn pot, baffle plate, auger shafts, auger bearings, 

and fasteners are covered for 1 year against cracking, breakage and welded seams from 
separating. 

4.  Electrical components, brick fiber board, accessory items, glass and the painted surface are 

covered for 1 year from the date of purchase.   

 

Conditions and Exclusions: 

Damage from over-firing will void your warranty. 
This warranty does not apply if damage occurs because of an accident, improper handling, improper 
installation, improper operation, abuse, or unauthorized repair made or attempted to be made.   
The manufacturer is not liable for indirect, incidental, or consequential damages in connection with 
the product including any cost or expense providing substitute equipment or service during periods of 
malfunction or nonuse.   
All liability for any consequential damage for breach of any written or implied warranty is disclaimed 
and excluded. Some states do not allow the exclusion or limitations of incidental or consequential 
damages, so the above may not apply to you.  
 

Procedure:  

Purchaser must give notice of claim of defect within the warranty period and pay transportation to 
and from a service center designated by the factory. The dealer from which the unit was purchased 
or the factory, at our option, will perform the warranty service. 
 

Other Rights: 

This warranty gives you specific legal rights, and you may also have other rights, which may vary 
from state to state. 
 

 

NOTE

:  THIS WARRANTY IS NULL AND VOID IF YOU DO NOT RETURN THE ATTACHED WARRANTY 

REGISTRATION WITH A COPY OF THE SALES RECEIPT WITHIN 30 DAYS FROM THE DATE 
OF PURCHASE. 

 

WARRANTY IS NOT TRANSFERABLE 

Содержание 10-CDV
































Отзывы: