Englander 25-PDVC Скачать руководство пользователя страница 5

Страница: 5 / 37

IMPORTANT!

READ AND FOLLOW

ALL

INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.

ENGLANDER IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO

UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.

Thank you for purchasing this fine product from Englander!

Englander was started, and is still owned by, a family that believes

strongly in a "Do It Yourself" spirit – that’s one reason you found this

product at your favorite “Do It Yourself” store.

We intentionally design and build our stoves so that any homeowner can

maintain his or her unit with basic tools, and we're always more than

happy to show you how to do the job as easily and as inexpensively as

possible.

From our free, downloadable service sheets; to our Pellet Service Video;

to our new "wizard-style," click-through Troubleshooting guide on our

web site, we have always tried to help our customers stay "heat-ready,"

especially when oil and electricity prices continue to skyrocket.

Please look at our vast Help section on our web site and call our

Technical Support department at (877) 356-6663 if you need any help with

your unit. We are nearly always able to help “walk you through” any

repairs, problems or questions you may have.

PLEASE NOTE: While information obtained on our web site and through

our number is always free of charge, there will be a service charge

incurred with any “on-site” repairs or maintenance that we may arrange.

Wishing you years of efficient, quality and “comfy” heating,

Englander

Technical Support Department

www.englander-stoves.com

(877) 356-6663

This manual is available for free download on the manufacturer’s web site. It is a copyrighted document and resale

is strictly prohibited. The manufacturer may update this manual occasionally and cannot be responsible for

problems including injuries or damages resulting from the use of information found in any manual from

unauthorized sources.

PLEASE NOTE: If you purchased this model from certain stores, their model number may end in “L” “LC” “H”

“CT”, etc. This manual does apply to those models as well.

CAUTION: Stove is heavy.

In addition, when handling any sheet metal products, be aware that there may be sharp edges or burrs.

Although we make every effort to eliminate any sharp edges, please use caution when handling any metal parts.

Remember to disconnect (unplug) the stove from the power source and allow it to completely cool down

before performing any maintenance.

Содержание 25-PDVC






































Результаты поиска

Содержание 25-PDVC

Отзывы:

Похожие инструкции для 25-PDVC

Бренды по названию

Популярные бренды

Englander 25-PDVC, Руководство по установке и эксплуатации

Результаты поиска

Содержание 25-PDVC

Отзывы:

Похожие инструкции для 25-PDVC

Бренды по названию

Популярные бренды