001-01-000054 Rev.000
Page 2 of 2
4. INSTALLATION
The CTC-239S mounts in one position of a 239-type
repeater housing or shelf. Electrical connections are
made through the 12-pin card edge connector. Pin
designations are outlined in Table 1.
PIN
DESCRIPTION
6
Side 1 Input - Tip
5
Side 1 Input - Ring
4
Side 1 Output - Tip
3
Side 1 Output - Ring
12
Side 2 Input - Tip
11
Side 2 Input - Ring
9
Side 2 Output - Tip
8
Side 2 Output - Ring
Table 1. CTC-239S pin designations
5. CUSTOMER SERVICE
If technical or customer assistance is required, please
contact Enginuity at the following address or phone
number:
Enginuity Communications
1251 Nagel Blvd.
Batavia, Illinois 60510
Toll Free: 1-800-980-3266
Voice: (630) 761-1892
www.enginuitycom.com
6. WARRANTY & REPAIRS
Warranty
Enginuity warrants this product for five (5) years from
date of purchase. Any attempt to repair or modify the
equipment by anyone other than an authorized Enginuity
representative will void the warranty.
Repair and Return
Enginuity equipment will be repaired or replaced without
cost during the warranty period if the product is defective
for any reason other than abuse, improper use, or
improper installation. Before returning defective
equipment, first request a Return Material Authorization
(RMA) number from Enginuity. Once an RMA number is
obtained, return the unit, freight prepaid, along with a
brief description of the problem, to:
Enginuity Communications
1251 Nagel Blvd.
Batavia, Illinois 60510
ATTN: Repair & Return Dept.
Replacements will be shipped in the fastest manner
consistent with the urgency of the situation. Repair or
replacement of faulty equipment beyond the warranty
period is available for a nominal charge. Contact
Enginuity for details.
7. SPECIFICATIONS
Mounting:
239-type T1 repeater slot
Size:
2.7" H x 0.6" W x 6.2" D
Weight:
0.1lb (1.6oz).