Enginko MCF-LW06424, Руководство по эксплуатации

Страница: 18 / 19

Last update: 2022/02/16 09:15 manual_mcf-lw06424 http://www.enginko.com/support/doku.php?id=manual_mcf-lw06424
http://www.enginko.com/support/ Printed on 2022/02/16 09:16
9 Payload
For payload descriptions, uplinks and downlinks format and available commands please refer to this
document:
DATA FRAME FORMAT
10 Ordering code
Code Description
MCF-LW06424 4-20mA to LoRaWAN® interface EU863-870
MCF-LW06424-AS 4-20mA to LoRaWAN® interface AS920-925
MCF-LW06424-US 4-20mA to LoRaWAN® interface US902-928
MCF-LW06424-AU 4-20mA to LoRaWAN® interface AU915-928
For payload descriptions, uplinks and downlinks format and available commands please refer to this
document:
DATA FRAME FORMAT
11 Declaration of conformity
Hereby, enginko Srl declares that MCF-LW06424 complies with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
12 FCC compliance for MCF-LW06424-US
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.