Engine LanDrive Series, Руководство пользователя и инструкция по установке

Страница: 8 / 15

Notification:
Welcome to use our products,in order to make you operate it in a more convenient and
faster way ,we advise you abide by the rules as follows:
1.
NAS to Network
Connet NAS to internet,turn on the switch power,after about 50 seconds ,you can link it
to the network so as to visit NAS via the net.
2. New Hard Disks
NAS only supports a divided part which is for FAT32.The new hard disks need formatting
by the internet setting menu.after this,you can use the hard disks normally.Attention
that the capacity of hard disk is not exceeding 300GB otherwise the internet system
cannot circulate the hard disk regularly.
3. Changing the NAS net setting
While shifting the net setup,you can switch off till the accomplish of page-
updating.Certainly,the updating time varies with different status of the net.So,power off
before page-updating and setup holding may lead to the breakage and uselessness of
NAS inside software.
*MAS destroy usually has such phenomena:
The system light can’t light after two-time’s lighting;
NAS cannot be visited by the net;
The USB interface can’t be used even connected with computer;
When facing these faults,you can solve them by inputting Fireware.
Please refer to the upgrading illustration for the ways of rewriting Fireware .
4.
RESET button
While setting up the NAS falsely and failing to visit it via the net,you can recover the
producing setup by pressing the RESET button for 10 seconds.
5. As a modem use
To use NAS as a modem,we advise you operate it with FIP software when uploading &
downloading files;such as CuteFTP.You can download the specific version in the officail
internet address of this software.
You can use FTP to upload and download files with better efficiency.
6. Connect computer with USB interface
After turning on the NAS power switch,the internet system is authorized to control the
hard diks and till the SYSTEM light is on,USB can visit the hard disks.The USB interface
and Lan interface can’t be used at the same time.
-6-