~55~
handset in phonebook mode.
b. For phone sending party, press
1
to enter sending mode.
i.
Either press
TX ALL
(left softkey) to transfer all
phonebook entries to another handset(s).
ii.
Or press
TX ONE
(right softkey) to transfer one entry to
another handset(s).
iii.
Press 2-digit handset ID or group ID, then select all
phonebook entries or one entry to be transferred.
Re : “00” means all handsets
iv.
During phonebook transferring, LCD shows “Sending”
and 2-digit countdown on the LCD to indicate the
phonebook numbers which are waiting for sending.
c. For phonebook receiving party, press
2
to enter receiving
mode.
i.
When entering the receiving mode, LCD shows “Ready”.
ii.
Start to receive phonebook, LCD shows “Get phonebook
from Ext. # : xx”.
iii.
A beep emitted when receiving each phonebook.
iv.
When the phonebook receiving, 2-digit countdown on
the LCD to indicate the phonebook numbers which are
waiting for receiving.
Re: The phonebook transfer through the wireless interface, it
may partially miss transmission by interference
Notes:
Character Table:
Key
Characters and Orders
1
‘ + , .
＊
( ) & 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
＊
Toggle case when in character editing
＊
P (Pause) when in number editing
#
Space – when in character editing
# when in number editing
~56~
Programmable PBX Options (Register to PRO base only)
1. When DuraFon PRO base unit installed behind the PBX
system, it is feasible to pre-program some PBX features
along with their feature codes into the system.
2. Up to 9 most frequently used PBX feature codes
can be pre-programmed.
3. Name and enter PBX feature codes:
a. Press
MENU
(Right) soft key while the handset is
in standby.
b. Press “5” following by “9” to enter “PBX Options”
menu.
c. Press
ADD
soft key to edit a PBX feature to be
memorized.
d. Key in the name of the PBX features just like
editing a phonebook entry i.e. PBX Transfer.
Press
SAVE
to confirm your entries.
e. Key in the feature code of the correspondence
PBX feature i.e. Flash*70. Press
SAVE
to confirm
your entries.
f. The first PBX feature and the correspondence
feature code you enter will appear on the LCD
screen.
[note] “F” represents the Flash signal
g. Press
OPTION
soft key to Erase or Edit the PBX
feature you program into the system.
h. Repeat the same operation to edit the second and
even the third PBX feature that you will use
frequently.
4. Using pre-programmed PBX feature during the call.
a. Press
OPTION
soft key while the handset is in
talk mode .
b. Press the correspondence number of the function
you want to perform i.e. press 1 to perform “PBX
Transfer” function.
c. Press
when you finish the desired function
and back to standby mode.
10
Settings:
8. Line Select
9. PBX Options
10
Empty
ADD
10
Feature Name?
Caps = *
SAVE DELETE
10
Feature Code?
SAVE DELETE
10
PBX Transfer
F*70
ADD OPTION
10
00:00:16
Volume:4
OPTION HOLD
11
1. PBX Transfer
0. Mute
