~25~
pressing
again. However, once a handset answers, only the answering
handset can end the call.
Notes:
1.
Due to for comply with existing DuraFon-HC, the display
does not match the behavior. For example, the intercom
call from base to handset, it displays “from Ext #90”
instead of “from Base xx”.
2.
No support line detection feature in DuraFon PSL-BU base.
Even you set “Line Det” from an administrator handset
(Handset 10 or 11) via pressing
MENU
-
9
–
1
–enter base
ID(00–07)-
3
to enable Line Det.
3.
In DuraFon PSL-BU base, no support “Auto Attendant”.
4.
In DuraFon PSL-BU base, no support “3-way Conference”.
5.
In DuraFon PSL-BU base, no support “Announced call
transfer”
6.
In DuraFon PSL-BU base, no support “ call waiting” from
other telephone lines, due to it is only single line.
7.
In DuraFon PSL-BU base, no support “Broadcast through
PBX”
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menu
selections. No password is required.
1. Supports both DTMF and Pulse dialing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11 ), press
MENU
-
9
–
1
–
enter base ID(00–07)-
1
to select Tone or Pulse dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
2
to
select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 6
00 ms
.
c. The default value (
600 ms
) works in most areas. Changing this setting
may result in Flash function not working. Change only when you are
certain the new value will work.
3. Call Transfer to PBX Extension(For DuraFon PRO only)
~26~
a. When the DuraFon PRO is installed behind a PBX system, you can pre-
program the feature code of call transfer function.
b. Need to adjust the Flash time to match your PBX setting.
Re: If loosing administrator handsets (handset 10 and 11), all settings must be
reset (reset the base and re-register all handsets).
