33
1. Enter the key sequence MENU – Sounds – Ring Volume, then
select “Off”. This will turn off the ringer until it is turn on again
from the menu.
2. For temporary silencing the ringer when an incoming call
arrives, press Silent (Left) soft key.
Key Guard
1. To prevent accidental dialing, you can press Menu (Right) soft
key, then select KeyGuard option. The handset keypad is
locked. No key entry is accepted except the power on/off key.
2. To unlock the keypad, press “Unlock” (Left) soft key, then,
within 2 seconds, press the digit “1” to unlock.
3. Key Guard is in effect until unlocked or powered off.
Battery Recharge and Replacement
1.
Charge the battery when one or several of the following
happen:
a.
Phone beeps twice every two seconds.
b.
Battery icon is empty.
c.
Phone does not respond when a key is pressed.
d.
LCD and backlighting become dim.
e.
Talk range shortfall is experienced.
2.
You can replace the handset battery after placing the call-in-
progress on hold.
3.
Battery talk time and standby time vary depending on the
talk/standby pattern and the operating distance. Putting the
handset back to charger cradle as often as possible is
recommended for best performance.
Note:
Use only manufacturer provided batteries and charger.
34
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has
been pre-registered with the base station at the factory.
2. You need to register the handset with the base station in the
following situations:
a. If a handset displays a Handset ID “00,” that means it is a
new handset or the ID has been erased.
b. In certain situations, you may want to change a handset’s
ID. For example, you want to change a particular handset
from a user to an administrator (ID 10 or 11), or vice versa.
Or in some rare occasions, you find another handset
having the same Handset ID.
3. Registration:
a. Press handset Menu (Right) soft key.
b. Press the number “6”, this will enter the handset
registration menu.
c. Press and hold the base’s Registration (REG) button for 2
seconds until the L1, L2, L3, and L4 LED come on.
d. Press handset key “1”, this completes the registration
process. The base station will assign a handset ID
between 10 and 99. The assigned ID will be displayed on
the handset LCD, indicating successful registration.
e. Repeat above steps for all additional handsets.
f. The first two handsets registered will be given ID 10 and
11, which gives them administrator privileges.
4. De-registration:
a. You can de-register a handset from a base. De-
registration will reset the Handset ID to 00, erase the
system security code, and free up the old ID for future
registration.
b. After deregistration, the handset will not be able to use the
base to make or receive phone calls, nor can it intercom
other handsets.
c. Press handset Menu (Right) soft key.
d. Press the handset number key “6”, this will enter the
handset registration menu.
