~49~
2. If the handset still indicates the icon even after you have listened to all
messages, turn it off by pressing and holding the “Caller ID” key on the
handset.
Adjust Handset Microphone Gain (sensitivity)
The microphone gain setting option is provided so you can adjust microphone
sensitivity custom to your workplace environment (such as a loud, noisy
environment etc.). Note: You may also want to adjust earpiece settings as well if
the workplace environment is extremely loud.
a. Press
MENU
right soft key while the handset is in standby mode.
b. Press “5” (Phone Settings), followed by “1” to enter the “Mic. Gain”
menu.
c. Use
or
key to scroll the “Standard”, “Medium” and “Low”
options.
d. If you are using the handset in a quiet environment, like office or
meeting room, the level of “Standard” is recommended.
If you are using the handset in a noisy environment, like a factory or
outdoor place, the level of “Medium” or “Low” is recommended.
Adjust Headset Ring
When using a headset, you can avoid missing a call due to the ringer ringing inside
the headset rather than outside the phone, by changing the ringer to the outside
speaker.
a. Press
MENU
right soft key while the handset is in standby mode.
b. Press “5” (Phone Settings), followed by “9” to enter the “Headset Ring”
menu.
c. Select “On”, the ringer will be heard in the headset.
Select “Off”, the ringer will be heard from the outside speaker.
Note: Default setting is “On”.
Baby Monitor
You can set any one handset as a “baby unit” to monitor a baby or older person.
~50~
When enabling baby monitor mode, the “baby unit” will automatically enter the
monitoring mode via 2-way intercom.
For example, if you set handset A as a “baby unit”, when making an intercom call
from handset B, handset A will automatically enter monitoring mode without
ringing. You will be able to hear all movements around handset A via handset B.
a. Press
MENU
right soft key while the handset is in standby mode.
b. Press “4” (Call Settings), followed by “5” to enter the “Baby Monitor”
menu.
c. Press “CHANGE” to switch ON or OFF (default is OFF).
Re: To avoid any interruptions while monitoring is active, the handset in
baby monitor mode will not ring from incoming calls, except intercom.
