Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wifiabc.com
Disclaimer: Information may be subject to changes without prior notification.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EWS320AP
Mounting the access point
The AP can be ceiling mounted or wall mounted depending on the setup.
To attach the access point to a ceiling or
wall using the mounting bracket:
Step 1: Attach the mounting bracket to the wall or
ceiling using the provided mounting kit.
Step 2: Insert the provided short screws into the
mounting holes. Make sure there’s enough space
between the screws and unit for the mounting
bracket. If extra space is required, use the provided
spacers and long screws from the T-Rail
mounting kit.
Step 3: Mount the access point to the mounting bracket by rotating the unit
clockwise about 90 degrees to secure it in place.
To attach the access point to a ceiling using T-Rail connectors:
Step 1: Attach the T-Rail connectors to the bottom cover of the access point
using the provided short screws. Use appropriate size T-rail connectors
(15/16” or 9/16”). If extra space is required to accommodate drop ceiling
tiles, use the provided spacers and long screws.
Step 2: Line up the connected T-rail connectors with an appropriately sized rail
and press the unit onto the rail until it snaps into place.
Note: To protect your access point, use the Kensington security slot to attach a
cable lock (cable lock is not included).
