EnGenius EWS660AP, Руководство пользователя

Страница: 19 / 76

Hardware Installation
1. Connect one end of the Ethernet cable into the main LAN
port (PoE) of the Access Point and the other end to the AP
Ethernet port on the PoE injector.
2. Connect the Power Adapter to the DC-IN port of the PoE
injector and plug the other end in to an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
the PoE injector and the other end to the Ethernet port on
the computer.
4. Once both connections are secure, verify the following:
a) Ensure that the
POWER light is on (it will be green).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will
be green for both 5 GHz and 2.4 GHz).
c) Ensure that the LAN (Computer/AP Connection) light is
on (it will be green).
d) Once all three lights are on, proceed to set up the Access Point using the computer.
Note : The Access Point supports both IEEE 802.3at PoE (Power over Ethernet) or the included power injector. You may use
either one as the power source. Do NOT use both at the same time.