IEEE802.11b/g Wireless LAN USB 2.0 Client Adapter
Version 1.1
14
digits, which is the MAC address of the AP.
o
Scanning:
Indicates that the wireless client is searching for an AP
in the area.
o
Disconnected:
Indicates that there are no APs or clients in the
area.
h
Extra Info:
Displayed here are information about the link stats and the
percent of output power.
h
Current Channel:
The operating frequency channel that the client is
using (infrastructure mode).
h
Link Speed
: The current rate at which the client is transmitting and
receiving.
h
Throughput (bytes/sec):
Displays the Tx (transmit) and Rx (receive)
kilo-bytes per second.
h
Link Quality:
In infrastructure mode, this bar displays the transmission
quality between an AP and a client. In Ad-hoc mode, this bar displays
the transmission quality between one client, and another.
h
Signal Strength:
This bar displays the strength of the signal received
from an AP or client.
h
Noise Level:
Displays the background noise level; a lower level
indicates less interference.
h
Click
on
the
OK
button to close this window.
h
dBm Check Box
. When you click on the check box as the drawing
below. The signal strength and noise level will be shown as the dBm
measurements.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
